Skip to main content
spackr
spackr
New Member
April 15, 2020
Solved

Multiple switches on a FortiGate not working

  • April 15, 2020
  • 1 reply
  • 6026 views

I am adding another building to an existing network and I am trying to create the following network setup:

 

[1st building]

cable modem ISP --> fortigate firewall --> JGS524NA --> cable to 2nd building

 

[2nd building]

cable from first building --> JGS524NA --> internal network of computers

 

The 1st building network has been excellent and has an existing switch to expand and support the onprem devices. Now I am trying to extend this network into a second building (less than 100m) away.

 

Here's the problem - when I plug in the cable from the first building into the new switch - its like the switch isn't even working - no lights show that the cable is plugged in. When I plug the cable directly into my laptop - it works just fine and I can get DHCP address.

 

But when I plug that cable into the switch and attach other devices to the switch - no other device will work.

 

Some observations:

[ol]
  • I purchased another switch - to rule out a hardware problem - same problem.
  • I also noted that when I plug in an old ($30 linksys router) everything works fine.[/ol]

    So my concern is that somewhere the fortigate is not allowing the switch to work (for some reason).

     

    As of now, I have tried connecting the switch directly to the 3 LAN interface on the firewall (rather than to the switch), but still have the same behavior.

     

    When attaching multiple switches, do I need a dedicated interface?

     

    Any thoughts on the above would be greatly appreciated!

      • Best answer by lobstercreed

      This really isn't a Fortinet-related query as the problem seems to somehow be cabling related.  When you plugged in your laptop and it worked, were you in the 2nd building at the end of the same cable that you're plugging into the 2nd switch?  I would use a network tester and make sure the cable run is good, because it sounds like something is messed up (maybe a T568A/B issue, idk).

       

      Another thing to prove it is cabling and not something else (really no way the FortiGate would have anything to do with a link that's not even connected to it coming up or not)...  Try moving the 2nd switch to the first building and plug in on the same port the 1st switch with a shorter patch cable.  If still no link then something is wrong with the port config (though I think those are unmanaged switches?).

      1 reply

      lobstercreed
      lobstercreedAnswer
      New Member
      April 15, 2020

      This really isn't a Fortinet-related query as the problem seems to somehow be cabling related.  When you plugged in your laptop and it worked, were you in the 2nd building at the end of the same cable that you're plugging into the 2nd switch?  I would use a network tester and make sure the cable run is good, because it sounds like something is messed up (maybe a T568A/B issue, idk).

       

      Another thing to prove it is cabling and not something else (really no way the FortiGate would have anything to do with a link that's not even connected to it coming up or not)...  Try moving the 2nd switch to the first building and plug in on the same port the 1st switch with a shorter patch cable.  If still no link then something is wrong with the port config (though I think those are unmanaged switches?).

      spackr
      spackrAuthor
      New Member
      April 16, 2020

      @lobstercreed - yes, you were right, I took the switch and plugged it directly into the fortigate and it worked just fine. I worked with technical support and we concluded the cable is too long (over the 100m) restriction. I'll be purchasing a repeater and that should solve this problem

      sw2090
      SuperUser
      sw2090
      SuperUser
      April 28, 2020

      Also take care that you don't build up Network loops. Moden Switches do have a loop protection enabled that will disable the port if it detects a loop. As you wrote of cable from AND to building #2 that may be an issue too.

      Terms & ConditionsAccessibility statement