Skip to main content
Saba1989
Saba1989
New Member
March 10, 2020
Question

multiple IPsec VPN on on one interface

  • March 10, 2020
  • 1 reply
  • 5257 views

hi guys i have a 200D fortigate and also 2 wan interface connected to 2 different ISPs i should configure more than 6 IPsec VPN for some reasons but i can configure 1 VPN on any wan interface.when i configured 2 vpn the first went down . i have to disable the second one in order to fix the first. what is wrong? how do i fix it?

    1 reply

    rwpatterson
    rwpatterson
    New Member
    March 10, 2020

    I currently have an ancient FWF81C that has many IPSec tunnels on the WAN interface. To boot it is using a dynamic IP address. Obviously there is a misconfiguration somewhere in your setup. Now you say the tunnel 'goes down'. Does the IPSec session drop or does the routing fail?

    emnoc
    emnoc
    New Member
    March 10, 2020

    If you provide more details like a config or topology we might be able to help.

     

    Ken Felix

    rwpatterson
    rwpatterson
    New Member
    March 10, 2020

    See the second post in the link below. It may answer your question.

     

    [link]https://forum.fortinet.com/FindPost/184013/[/link]

    Terms & ConditionsAccessibility statement