Skip to main content
vishal
vishal
Visitor III
June 25, 2021
Question

Moving Fortigate device from one place to another

  • June 25, 2021
  • 1 reply
  • 4149 views
Hello All, I have two Fortigate devices 1100D in my premises running Active-Passive mode using two port as HA links and one lan and wan link on each devices. Basically I need to move these devices from one building to another. Need to know what are the precaution I need to take so that my HA should reforms smoothly without any challenges.

    1 reply

    Toshi_Esumi
    SuperUser
    Toshi_Esumi
    SuperUser
    June 25, 2021

    Nothing particular as long as the network topology stays the same at the new location. Then they would come up in the same way when you power them down and back them up at the current location.

    vishal
    vishalAuthor
    Visitor III
    June 26, 2021
    Thanks Toshi, Yes network topology is same at new location but my query is should I connect HA cables and then power up devices or power up devices and then connect HA cables
    ede_pfau
    SuperUser
    ede_pfau
    SuperUser
    June 26, 2021

    Definitively you should fully cable the cluster while both units are powered down*, and then power up one after the other. Sequence and time between do not matter.

    Why?

    If you fully cable both units except for the HA connections (hopefully, you use more than one HA cable), each of the two unit will determine that it is the master. Each will assume identical MAC addresses for the interfaces in use, along with IP addresses as well. This will usually disrupt all network activity.

     

    * to be precise, "while at least one of the units is powered down".

    Terms & ConditionsAccessibility statement