Skip to main content
Putmano
Putmano
New Member
July 14, 2017
Solved

Move the IPS VPN from Fortigate to Fortimanager

  • July 14, 2017
  • 2 replies
  • 8371 views

Currently I have 2 FortiGate 600D running for VPN gateway in my infrastructure with 80 active tunnels. We just bought Fortimanager and we want to manage VPN on FortiGate but I cannot import the VPN Tunnel on FortiGate to the FortiManager.

I have enabled VPN Central Management on FortiManager. However it sill cannot see the tunnels on FortiManager.  Have anybody experiences with VPN on FortiManager?

Thanks in advance. 

Best answer by ergotherego

I wouldn't recommend using the Central VPN Manager tool for IPSec VPNs personally. It's too limited in my opinion, and knowing FMG there are likely some bugs in it since its more of an edge-case feature.

 

You can still manage your IPSec VPNs directly under the Device itself, which lets you manage each tunnel individually just like you would on a FGT.

 

You probably need to adjust your Display Settings first:

 

Device Manager > Tools > Global Display Options

 

Then under the section for VPN make sure IPSec Phase 1 and 2 are enabled.

 

Inside Device Manager, you can double-click on your firewall to enter its configuration page (these are the device level settings). You will now see an option for VPN in the grey menu bar.

 

Note: Even with VPN Central Manager disabled for a given ADOM, you still use it to manage SSLVPN.

2 replies

ergotherego
ergotheregoAnswer
New Member
July 14, 2017

I wouldn't recommend using the Central VPN Manager tool for IPSec VPNs personally. It's too limited in my opinion, and knowing FMG there are likely some bugs in it since its more of an edge-case feature.

 

You can still manage your IPSec VPNs directly under the Device itself, which lets you manage each tunnel individually just like you would on a FGT.

 

You probably need to adjust your Display Settings first:

 

Device Manager > Tools > Global Display Options

 

Then under the section for VPN make sure IPSec Phase 1 and 2 are enabled.

 

Inside Device Manager, you can double-click on your firewall to enter its configuration page (these are the device level settings). You will now see an option for VPN in the grey menu bar.

 

Note: Even with VPN Central Manager disabled for a given ADOM, you still use it to manage SSLVPN.

chall_FTNT
Staff
chall_FTNT
Staff
July 17, 2017

> we want to manage VPN on FortiGate but I cannot import the VPN Tunnel on FortiGate to the FortiManager.

 

Unless you are running FMG 5.6.0 or later, using VPN Central Manager does not support preexisting VPN tunnels.  In this mode, all tunnels must be created by the FortiManager.  VPN tunnels configured prior to enabling VPN central management will be removed.

 

If FMG 5.6.0 or later, enabling VPN Central Manager will not affect existing VPN tunnels.

 

So this may not fit your situation.  That said, VPN Central Manager can greatly simplify large scale VPN deployments and there is no reason to shy away from it provided it meets your requirements.

linfante
linfante
New Member
September 20, 2017

I could be wrong, but you'll need to recreate them in the FMG VPN Manager first and then apply the VPNs to the FG in FMG. That's the plan we have anyhow. It made mention of deleting all the VPNs if we turned on the VPN Manager with the FG already added to FMG so the FG was removed from FMG, and then VPN Manager turned on so that VPNs could be recreated.

Terms & ConditionsAccessibility statement