Skip to main content
BrianB
BrianB
New Member
June 26, 2019
Question

Managed fortiswitch alias?

  • June 26, 2019
  • 1 reply
  • 3921 views
Is there a way to associate an alias with a fortiswitch serial number? The managed switch controller GUI is great but it is slow (6.2). Modifying port vlans, etc. is just too time consuming in the GUI. From the cli, when I edit a switch via the switch controller, I edit then tab and it autocompletes using the switch serial number. Can I alias a serial number to a name like “switch1”? Thanks, Brian

    1 reply

    thuynh_FTNT
    Staff
    thuynh_FTNT
    Staff
    June 28, 2019

    Hi Brian, thanks for the feedbacks.

    >Is there a way to associate an alias with a fortiswitch serial number? Yes, in 6.2.0 GA you can modify the FSW's name from FGT GUI (see attached). Is this what you are looking for?

    >The managed switch controller GUI is great but it is slow (6.2). Modifying port vlans, etc. is just too time consuming in the GUI.

    Can you give a more specific examples of the steps? Which part is slow? Some screenshot would be great. 

     

    >From the cli, when I edit a switch via the switch controller, I edit then tab and it autocompletes using the switch serial number. 

    The CLI usecase is different but not sure where on the GUI would you expect to have a similar functionality? 

    > Can I alias a serial number to a name like “switch1”? Yes, you can edit the FSW from FGT GUI > Managed FSW and add a name for it there.

    BrianB
    BrianBAuthor
    New Member
    July 11, 2019

    Thuynh, yes I am aware that I can name the switches in the GUI. I was looking to create an alias for a switch that can be used from the cli. When I edit a switch in the cli, I can only do it by "edit serialnumber" of switch. I would like to alias a switch serial number to a common name, like "switch1" so that in the cli I can "edit switch1" instead of

    "edit fn448dp9890302"

    thuynh_FTNT
    Staff
    thuynh_FTNT
    Staff
    July 12, 2019

    Thanks Brian for the suggestion but it's more complex to support it at CLI level. FYI we will be improving the performance for the FSW management page so you should be able to do most things in via the GUI.

    Terms & ConditionsAccessibility statement