Lost super_admin - how to exec factoryreset?

Forum|Forum|2 years ago
March 11, 2024
3 replies
1765 views

Hi,

we have a HA config where sometime ago we backup them up with the wrong prof-admin. So now we dont have any super_admin accounts and the FGs have 7.4.3 so no maintainer option, right?

I was thinking of changing the cnfig file, restore a new master config with super_admin instead of prof_admin in the admin accounts and change slave to master, reset master and set up new HA.

Now I found out that I cant execute factoryreset, I connected via console and I guess again admin rights.

What can I do?

Thanks

FortiGate

Best answer by sw2090

In this case there is two options:

1) use the reset button - if your FGT happens to have one. Press it within the first 2min after startup and watch your serial console. It will then perform factory reset.

2) if there is no reset button the only way will be to format the boot partition which afterwards will require you to flash new firmware image via tftp.

sw2090Answer

SuperUser

In this case there is two options:

1) use the reset button - if your FGT happens to have one. Press it within the first 2min after startup and watch your serial console. It will then perform factory reset.

2) if there is no reset button the only way will be to format the boot partition which afterwards will require you to flash new firmware image via tftp.