looking for similar spec in Fortinet Next-Gen Firewall
we require an appropriate firewall system as per following spec:
[ul]Main features
:
The appliance based security platform should be capable of providing firewall, application control and IPS functionality in a single appliance. The solution should provide with next-generation firewall, Next-Generation IPS, URL protection, malware and spyware protection with application visibility/identification.
[ul]Interfaces
:
2x 10 GE SFP+, 18x GE RJ45, 4x Shared Port Pairs, 8x GE SFP
[ul]Power supply
:
Dual power supply
[ul]Operating System
:
64 bit
[ul]Protection type
:
7 Layer
[ul]New Sessions/Sec
:
Minimum 56,000
[ul]Firewall Policies
:
Minimum10,000
[ul]IPsec VPN Throughput (512 byte) 1
:
Should be 11.5 Gbps
[ul]Concurrent SSL VPN Users (Recommended Maximum, Tunnel Mode)
:
Should be 500
[ul]Local Storage
:
Should be 480 GB (101F)
[ul]NGFW Throughput (Enterprise Mix) 2, 4
:
Minimum 1.6 Gbps
[ul]Concurrent SSL VPN Users (Recommended Maximum, Tunnel Mode)
:
500
[ul]IPS Throughput (Enterprise Mix)
:
2.6 Gbps
[ul]Throughput
:
1.6 Gbps
[ul]Firewall Backplane architecture
:
20 Gbps
[ul]Protection type
:
7 Layer
[ul]Terms and Conditions:
:
[ul]Warranty
:
Manufacturer’s warranty part number should be mentioned, minimum 3 (Three) years warranty for OEM technical solution support, Patch & New Software Upgrade, RMA replacement should be provided for this unit from the date of commissioning.