Skip to main content
Armando_Gomez_Barrio
Armando_Gomez_Barrio
New Member
May 31, 2017
Question

Loading FortiAnalyzer firmware image using TFTP

  • May 31, 2017
  • 1 reply
  • 8685 views

hi, my name is Armando, from CDMX

 

I am facing an problema, I wan to return to factory values a FAZ 2000B, I execute the command "execute restore image tftp FAZ_2000B-v5-build0724-FORTINET.out 192.168.2.137" and only updates the FAZ 2000B, does not return to factory values.

 

The problem I have is the imagen attached

 

the FAZ has not console port, I am connect with a monitor

 

thanks.

1 reply

hzhao_FTNT
Staff
hzhao_FTNT
Staff
May 31, 2017

Please use "execute reset all-settings" for factory reset.

 

regards,

hz

Armando_Gomez_Barrio
Armando_Gomez_BarrioAuthor
New Member
June 1, 2017

thaks, a question

 

have you ever loaded the firmware by interrupting the boot sequence

 

Thanks...

 

hzhao_FTNT
Staff
hzhao_FTNT
Staff
June 1, 2017

Armando Gomez Barrios wrote:

 

have you ever loaded the firmware by interrupting the boot sequence

 

 

Yes, that will reset all-settings too. BTW, if you want to completely remove all old contents, you will need format disk by "exe format disk-ext4 <raid-level>"

 

regards,

hz

Terms & ConditionsAccessibility statement