Skip to main content
Serif
Serif
New Member
December 18, 2015
Question

Live IP range on WAN1 and on DMZ.

  • December 18, 2015
  • 1 reply
  • 2259 views

Hi all, we're looking at putting a 60d in place and have 4 live servers already configured with Live IP addresses.

 

Problem is that the WAN1 port needs our first live ip and our live servers are on the same subnet so that isn't possible - so it would seem.

 

I really don't want to have to change my Live IPs on my servers to private ip's and VIP to them, is their any way to get the Live IP's on the DMZ port?

    1 reply

    ede_pfau
    SuperUser
    ede_pfau
    SuperUser
    December 18, 2015

    Why would you not use VIPs for this, as they are the built for exactly this purpose? There is no other way to forward traffic through the FGT.

    Alternatively, you could put a switch behind your router and connect the servers and the FGT to it. Your servers would not be proteced then but would be able to use a public IP address.

    Terms & ConditionsAccessibility statement