Skip to main content
FatalHalt
FatalHalt
New Member
May 26, 2017
Question

List of Device Indexes

  • May 26, 2017
  • 2 replies
  • 19260 views

Is there any quick and easy way to get a list of device index's from a device? 

 

I'm wanting this for analyzing sessions in the session list.

 

orgin->sink: org pre->in, reply out->post dev=165->157/157->165 gwy=x.x.x.x/0.0.0.0

 

I know if I go and look through all of my interfaces one by one I can find these, but is there a simple list of them anywhere?

 

 

    2 replies

    emnoc
    emnoc
    New Member
    May 26, 2017

    What do you mean by index as in snmp? Just snmpwalk the   unit

     

    snmpwalk -c <communit> -v2v 1.1.1.1 if.Index

     

    or maybe

     

    diag netlink interface  list | grep index

     

     

    Agent_1994
    Agent_1994
    New Member
    May 29, 2017

    Try:

     

    diagnose sys device list VDOM

     

    IE:

     

    diagnose sys device list root
    list virtual firewall root info:
    ip4 route_cache: table_size=262144 max_depth=3 used=381 total=426
    arp: table_size=4096 max_depth=1 used=52 total=52
    proxy_arp: table_size=256 max_depth=0 used=0 total=0
    arp6: table_size=4096 max_depth=2 used=10 total=13
    proxy_arp6: table_size=256 max_depth=0 used=0 total=0
    local table version=0000004c main table version=00014bc0
    vf=root dev=tunnelbroker index=3
    vf=root dev=wan1 index=5
    vf=root dev=wan2 index=6
    vf=root dev=internal9 index=15
    vf=root dev=internal10 index=16
    vf=root dev=internal11 index=17
    vf=root dev=internal12 index=18
    vf=root dev=internal13 index=19
    vf=root dev=internal14 index=20
    vf=root dev=modem index=23
    vf=root dev=root index=24
    vf=root dev=ssl.root index=25
    vf=root dev=DSI WIFI index=26
    vf=root dev=DSI-INVITADOS index=27
    vf=root dev=DSI-SERVERS index=28
    vf=root dev=DSI-LAN index=29
    vf=root dev=DSI-LAN7 index=30
    vf=root dev=DSIRos-DSIBue index=31
    ses=0/0 ses6=0/0 rt=0/0 rt6=0/0
    Golle
    Golle
    New Member
    December 24, 2023

    This did not work for me on Fortios 7.2.5, no indexes were displayed.

    I found this alternative command that provided the index as part of the output

    diag netlink interface list | grep index if=wan1 family=00 type=1 index=5 mtu=1500 link=0 master=0 if=wan2 family=00 type=1 index=6 mtu=1500 link=0 master=0 if=internal1 family=00 type=1 index=8 mtu=1500 link=0 master=0 if=internal2 family=00 type=1 index=9 mtu=1500 link=0 master=0 if=internal3 family=00 type=1 index=10 mtu=1500 link=0 master=0 if=internal4 family=00 type=1 index=11 mtu=1500 link=0 master=0 if=internal5 family=00 type=1 index=12 mtu=1500 link=0 master=0
    Terms & ConditionsAccessibility statement