Skip to main content
jeffersonareias
jeffersonareias
New Member
October 23, 2019
Question

Link Algar configuration issue

  • October 23, 2019
  • 2 replies
  • 2752 views

Good morning everyone! I am having trouble configuring Algar Brasil's Internet Link. The company has passed an IP range and submask for configuration, every time I try to configure the IP on Fortinet 50e Wan 1 or Wan 2, it has no connection, an outbound firewall rule has already been made. There is some more setup that must be done for it to connect with the equipment. I'm waiting. Thanks.

    2 replies

    Fullmoon
    Fullmoon
    New Member
    October 23, 2019

    how about defining static route?

    sw2090
    SuperUser
    sw2090
    SuperUser
    October 25, 2019

    could you provide more info please?

    Do you have a router from Algar? Ist it connected to the wan you want to use? Does the port have link (it should be up when it is connected to router even without policies or routes)

    the port it self I woulld configure:

     

    Role: WAN

    Mode: static

    IP: <ip your ISP gave you> (if they gave you a range take one out of it but mind the netmask and dont use network or broadcast address!)/<netmask or prefix>

     

    Since you cannot enter a gateway here you either have to have a default route pointing to the interface or if you use sdwan enter the gw into sdwan!

    Terms & ConditionsAccessibility statement