Latest Firmware for FGT-60 ?

Forum|Forum|13 years ago
March 11, 2013
5 replies
8914 views

Hi, Who can say me, what is the latest firmware update for Fortigate 60 ? And where can i download that without contract registration ? Thanks a lot for your reply.

Best answer by emnoc

Same here , FGT60 and one FWF60A, both are uploaded to the latest firmware that was available. No problems, actually compared to v4 and v5, really NO problems :) FortiWiFi-60 # get hard status Model name: FortiWiFi-60 ASIC version: CP4 ASIC SRAM: 64M CPU: VIA Samuel 2 RAM: 123 MB Compact Flash: 30 MB /dev/hda USB Flash: not available Network Card chipset: VIA VT6105M Rhine-III (rev.0x96) Network Card chipset: VIA VT6102 Rhine-II (rev.0x51) Wifi Chipset: Intersil 3890 WiFi firmware version: 1.0.1.0 FortiWiFi-60 # get sys status Version: FortiWiFi-60 3.00,build0730,080919 Virus-DB: 8.00631(2008-01-15 14:27) IPS-DB: 2.00461(2008-01-18 11:23) Serial-Number: FWF-602104402047 BIOS version: 03000301 Log hard disk: Not available Hostname: FortiWiFi-60 Operation Mode: NAT Current virtual domain: root Max number of virtual domains: 10 Virtual domains status: 1 in NAT mode, 0 in TP mode Virtual domain configuration: disable FIPS-CC mode: disable Current HA mode: standalone Distribution: International Branch point: 730 MR/Patch Information: MR7 Patch 1 System time: Mon Mar 11 14:42:59 2013

rwpatterson

New Member

Welcome to the forums. The latest version WAS v3, MR7, P10. Without a support contract, you cannot get to the firmware download page.

vanc

New Member

As a matter of fact, I' m still using a FWF-60 which is running 3.0 MR7. After 6 years, it' s still rock solid, online 24x7.

I' m not using it for AV, or IPS. Just general firewalling plus wifi.

emnocAnswer

New Member

Same here , FGT60 and one FWF60A, both are uploaded to the latest firmware that was available. No problems, actually compared to v4 and v5, really NO problems :) FortiWiFi-60 # get hard status Model name: FortiWiFi-60 ASIC version: CP4 ASIC SRAM: 64M CPU: VIA Samuel 2 RAM: 123 MB Compact Flash: 30 MB /dev/hda USB Flash: not available Network Card chipset: VIA VT6105M Rhine-III (rev.0x96) Network Card chipset: VIA VT6102 Rhine-II (rev.0x51) Wifi Chipset: Intersil 3890 WiFi firmware version: 1.0.1.0 FortiWiFi-60 # get sys status Version: FortiWiFi-60 3.00,build0730,080919 Virus-DB: 8.00631(2008-01-15 14:27) IPS-DB: 2.00461(2008-01-18 11:23) Serial-Number: FWF-602104402047 BIOS version: 03000301 Log hard disk: Not available Hostname: FortiWiFi-60 Operation Mode: NAT Current virtual domain: root Max number of virtual domains: 10 Virtual domains status: 1 in NAT mode, 0 in TP mode Virtual domain configuration: disable FIPS-CC mode: disable Current HA mode: standalone Distribution: International Branch point: 730 MR/Patch Information: MR7 Patch 1 System time: Mon Mar 11 14:42:59 2013

Vt58067.jpg

pippen34

New Member

could you share a link to download firmware v4 for fgt-60

kckong

New Member

I had an OSPF route issue on a FGT-60 before. Sometime one or two desktop (not all) at remote site (only 4 staffs) with FGT-60 running 3.0 MR7 patch 10 cannot reach the e-mail server at head office via VPN tunnel running OSPF route. The problem desktop cannot ping the internal IP of e-mail server, however I can remote access these problem desktops via VNC, with their internal IP through the VPN tunnel. The only solution for this issue is to reboot the FGT-60, then the problem is gone. Later the FGT-60 is replaced by a FGT-60C, with OS 4. I import the same VPN and OSPF route setting to this new fortigate, then no such problem happens again. For the old FGT-60, I keep use it in my home for BT, also have OSPF route to head office, it works fine without the problem. Mostly likely the problem is memory leakage issue, as the memory usage is always over 80% when this old fortigate use in remote branch office.

Sign up

Login with SSO

Login to the community

Login with SSO