Explorer

Question

Lan port going down and up very often (log id 0100020099)

Forum|Forum|1 year ago
October 16, 2024
5 replies
3802 views

Hello.

I'm managing a Fortigate 40F v 7.0.11 and I'm getting in System Events logs many line reporting that my lan interface is going down and up with log id = 0100020099.

When Fortigate logs those lines I can see my ping tests to 8.8.8.8 failing and usually I get customers complaining about a no stable internet.
The main problem is that it's not constant. I'm getting this behavior a lot of time during a day.
I'm using SD-WAN in lan3 and "a" ports (I just disabled tha Wan port because I have an disabled link in this port) but even when I had Wan port available I was getting the same error but less often.
I really don't know what is causing this behavior.. could it be cable or a faulty port in my switch?

I'm almost loosing my customer because of this weird behavior.

Appreciate any help.

Thanks

FortiGate

AEK

SuperUser

Hi

Try the following:

Replace the cable (use a new Cat6a cable)
Change the port from FG side
Change the port from switch side

AEK

gboaronAuthor

Explorer

OK. Yesterday I changed the cable and changed the switch port. Everything looks good so far but I didn't have the time to change the FG lan port yet because it's a device in production but I'll do that if necessary.

Thanks.

AEK

SuperUser

Happy to hear it.

If it's fixed then you don't need to change FG port.

AEK

kaman

Staff

NOTE: Some modems, ComCast for example, are known to drop the network connection or reboot if they receive non-DNS traffic on UDP port 53 which is well known DNS port, but which is also used to connect to the FortiGuard service.

It is not necessary that the Link Monitor feature is configured, this log message will appear in logs each time the physical link is lost.

This cause can be confirmed by connecting a switch between the FortiGate and a modem.

If the switch has logging functionality then the interface facing the FortiGate will be stable while the interface connected to a modem will be flapping.

The workaround is to use port 8888 for FortiGuard. This can be changed from GUI or CLI.

Please refer to the below document for more information:

https://community.fortinet.com/t5/FortiGate/Technical-Note-Change-of-FortiGuard-Filtering-Port-to-mitigate/ta-p/194031

If you have found a solution, please like and accept it to make it easily accessible to others.

Aman

gboaronAuthor

Explorer

I found this document during my research. I don't think this would be the problem because I disabled all the filtering related services for debuging and it's configured for HTTPS/443 port and the problem was still going on.

Anyway, it's also very weird and unsafe that FG would run a service in any reserved ports like 53. :)

Thank you for your help.

Sign up

Login with SSO

Login to the community

Login with SSO