Skip to main content
ar4479
ar4479
New Member
October 4, 2019
Solved

LACP support in 6.2.1 on 61e

  • October 4, 2019
  • 1 reply
  • 8120 views

Does anyone know if LACP is supported on the 61e?

The doc shows "Link Aggregation Control Protocol (LACP) is now supported on FortiGate and FortiWiFi 90E, 80E, 60E, 50E, and 30E devices."

 

Not sure why it's limited to these model numbers and not the "odd numbered" units.

I can't find the option available in a 61e after a firmware update.

 

Does anyone have any insight?

 

Thanks!

    Best answer by ede_pfau

    LACP support for 31E-9xE is planned for FortiOS v6.2.2, it's not supported in the current v6.2.1.

     

    1 reply

    ede_pfau
    SuperUser
    ede_pfauAnswer
    SuperUser
    October 5, 2019

    LACP support for 31E-9xE is planned for FortiOS v6.2.2, it's not supported in the current v6.2.1.

     

    Ron_Uss
    Ron_Uss
    New Member
    October 5, 2019

    You can do that on FG60E with 6.2.1... I just tried it:

     

    config system interface     edit "TEST"         set vdom "root"         set type aggregate         set member "internal6" "internal7"         set device-identification enable         set lldp-transmission enable         set snmp-index 16     next end

     

    After that, I have this interface normally in GUI. (I don't know if this option was in GUI before I did that in CLI, I didn't check it)

    ede_pfau
    SuperUser
    ede_pfau
    SuperUser
    October 5, 2019

    Yep, the question is about the "x1x" models with internal SSD. Those will be supported in a later version.

    Terms & ConditionsAccessibility statement