Kids limitation to 2 hours.

I'm not sure if you can limit it to specifically two hours, but you should be able to limit device access after a certain time (say, 9:00 PM).  Try this:

From Policy & Objects > Schedules:  Create a new schedule with a start and end time.

From Policy & Objects > IPv4 Policy:  Create a new policy to blocks internet access from the device(s) in question, and from the Schedule box, select the policy you created above.

Of course, optionally, just pry the device from their hands as they scream in protest ;)

Hello,

No feedback ? I've updated to 6.0.3.

Thx

Can someone recommend a reliable website for fostering care support?

Hey there!
To limit your kids' internet access, try checking out the parental control features on your router. Many have built-in options to set time limits and filter content. If you need help, reach out to your router's customer support.
Also, if you're interested in foster care support, local agencies, and non-profits can offer classes and training. It's a challenging but rewarding experience, so look into it further if you're interested.
Good luck with your router settings and parenting journey!

Hi,

As you want to restrict maximum of two hours during weekend, can schedule a policy for weekend and can configure quota limit for two hours.
Refer the below link for your reference
https://docs.fortinet.com/document/fortigate/6.2.12/cookbook/801136/usage-quota

For those looking for the Category Usage Quota options under Web Filter profile on some newer FortiOS like 7.2.7
https://docs.fortinet.com/document/fortigate/7.2.7/administration-guide/801136

Just mind that Web Filter profile in those versions are, as policies, in flow based inspection mode by default.
As Category Usage Quota depends on proxy inspection mode, then you need to

1. make profile without quota

2. edit it again and use "Edit in CLI" from right hand menu

3. as Web CLI opened will bring you right to edited profile then only thing needed is to switch profile to proxy .. "set feature-set proxy"

4. now reload the GUI so edit profile again, and you should see both,
"Feature set" right on top under Comments box

"Category Usage Quota" under FortiGuard Category Based Filter selections

Documentation is not accurate enough so update submitted.