Skip to main content
lmfvdesk
New Member
Sep 28, 2026 1:13 PM UTC
Question

Kernel Boot Trap between Forticlient and Dell Pro 3 14260

Hello,

I’m creating this Topic because I’m facing an issue that neither me, Dell or our Forticlient provider faced before and we both have no idea what exactly is going on.

 

We ordered a batch of Dell Computer Pro 3 14260. Those computers are facing kernel boot trap double fault with fortishield.sys. It occurs most of the time when the computer is booting with Forticlient 7.2.15.1309, but also very often when connecting or disconnecting of Forticlient.

 

We also tried with 7.2.14 and 7.2.13 with same issue

Our EMS is in 7.2 so we can’t try 7.4 for now it’s ongoing we have to build a linux machine for the upgrade.

We don’t have this problem with any other dell computer model

 

Of course if I don’t have Forticlient installed I don’t have any issue

I’m trying to compare the components for those computers and see what could be conflicting but extremely difficult 

 

I just know it’s something with fortishield.sys as it is mentioned in the minidumps

 

If anyone faces this (no result on forum search) or have an idea of the cause, we sadly can’t deploy our brand new computers due to that.

 

 

25 replies

Markus_M
Staff & Editor
Staff & Editor
Sep 28, 2026 8:08 PM UTC

Do you have more information on that problem, photo or screenshot maybe of that issue? It seems to be something hardware related, but it could also be some specific software that is running on these devices, like some antivirus program bundled with the laptop.

Translate
Best regards, Markus
lmfvdesk
lmfvdeskAuthor
New Member
Sep 29, 2026 6:42 AM UTC

 

Here is what we get, basic windows screen of death

 

What we already tried disabling HVCI related features, microprogram and memory integrity check in windows 11

We know it’s a double fault low level kernel trap caused by fortishield.sys as it’s what is mentioned in the minidump (I can provide if needed)

Fortishield driver tries to lock and the machine goes in panic mode and crash 

 

We don’t have the issue on older computer model so it’s something between forticlient and either something on hardware or in the bios but we tried to compare and nothing obvious

 

Dell on their side never got feedback before, we are the first one but the machines we ordered are very new and recent, so not much deployed around the world yet

Translate
Markus_M
Staff & Editor
Staff & Editor
Sep 29, 2026 8:49 AM UTC

If possible, provide the memory dump from that crash.

Translate
Best regards, Markus
lmfvdesk
lmfvdeskAuthor
New Member
Sep 29, 2026 8:52 AM UTC

You will find attached different ones :

 

  • blue screen 7.2.14 is blue screen occuring with forticlient 7.2.14 (mainly when connecting or disconnecting to forticlient)
  • Minidump integrite memoire off is with 7.2.15 while we had HVCI features disabled

They are similar but as I was not aware yet I logged any minidump of each step of our searches

Translate
Markus_M
Staff & Editor
Staff & Editor
Sep 29, 2026 9:25 AM UTC

I checked the one without HVCI. This was a kernel stack overflow that turned into a double fault, and the driver at the bottom of the captured stack is FortiShield.sys (the real-time protection / filter driver of FortiClient).
In an elevated prompt, run

fltmc filter
fltmc instances

and look for other security or monitoring products (a second AV/EDR, DLP, backup agents, Dell security tools).
Make sure only one product is doing real-time protection; Defender should switch to passive mode if FortiClient is the AV.

Translate
Best regards, Markus
lmfvdesk
lmfvdeskAuthor
New Member
Sep 29, 2026 9:45 AM UTC

Ok reinstalling 7.2.15 and will run that to have a look and let you know thanks already for the help ! 

Translate
lmfvdesk
lmfvdeskAuthor
New Member
Sep 29, 2026 3:10 PM UTC

Hello

Thinking of it and having a test machine with me I uninstalled our EDR and faced BSOD still

 

Here are the results of the two commands, in attachments

I’m not skilled around this command so not sure I can do something with the results, i just don’t notice much about dell or windows defender in the results

Translate
Visitor II
Oct 1, 2026 1:48 AM UTC

I came here to say I am experiencing this same issue with a new batch of Dell Pro 3’s as well - 

also affected on FortiClient 7.4 (FortiShield_74.sys), Windows 11 build 26100, BIOS 2.4.0.0, dumps, FAILURE_BUCKET_ID: 0x7f_8_FortiShield_74!unknown_function

Have you tried uninstalling any of the Dell Third Party Tools? Optimiser, Core Services, Dell Support etc? 

Translate
Visitor II
Oct 1, 2026 5:53 AM UTC

Uninstalled the third party dell tools = same results
It looks like its a trigger could be when I plug in a USB into the USB port, It triggers the kernel crash - But it doesn't happen every time.

Translate
lmfvdesk
lmfvdeskAuthor
New Member
Oct 1, 2026 6:53 AM UTC

Hello, can’t tell if sad or glad someone else has the issue 😅

 

We have a quite clean image so we don’t have much dell extra softwares 

 

We are currently creating a 26H2 image to see if it helps or changes anything

 

On our side it’s also not everytime, didn’t try USB plug/unplug, but we trigger it mainly at profile startup or when connecting/disconnecting of Forticlient

Translate
lmfvdesk
lmfvdeskAuthor
New Member
Oct 1, 2026 9:43 AM UTC

Was to be expected but having BSOD in 26H2 as well

Translate
Risk and Resilience in the Age of AI. An OT Thought Leadership Summit for Houston's Critical Infrastructure Leaders. Date: Thursday, December 3, 2026. Time: 8:30 am - 1:30 pm (CT). Location: The Westin Houston, Memorial City | 945 Gessner Road, Houston, TX 77024