When clients work remotely and connect VPN via FortiClient it takes too long to get the access to the shared drives after connecting with FortiClient, sometimes it takes more than 20 minutes show up the network drives.
Any ideas?
Thanks
If you can access the resource via its IP (not hostname) then you VPN is basically fine.
You can still check if your split DNS is enabled and working fine in order to correctly access the resource via its hostname, by testing with dig or nslookup. E.g.: dig host.internaldomain.com
If it gives the right IP then the split DNS is working fine, and the 20mn delay may be due to the fact that the host.internaldomain.com is defined in both public DNS and private DNS.
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
