Skip to main content
akshar
akshar
New Member
February 23, 2017
Question

Is forticlient 5.4.2 compatible with Stringswan server ?

  • February 23, 2017
  • 1 reply
  • 2616 views

Dear team       Is forticlient 5.4.2 compatible with Stringswan server (U5.4.0/K3.10.0-123.4.4.el7.x86_64) ?       Authentication mechanism used was only PSK only           1)IKE phase 1 was successful       2)MODE CFG messages was also sucessfull  and the client received an ip address       3)in QUICK mode client generates IDci == IP ADDRESS received in MODECFG(01000000 0afe0014)         ,IDcr=ID_IPV4_ADDR_SUBNET (04000000 00000000 00000000)  and sends the request to server .client receives response  IDci=IP ADRESSS which was sent in request  and IDcr=ID_IPV4_ADDR_SUBNET(04000000 0afe0000 ffffff00). Fortinet clinet was printing "VPN    mismatched ID was returned."  and sending ATTRIBUTES_NOT_SUPPORTED notify messsages to the server .                 Thanks and regards       Akshar

    1 reply

    emnoc
    emnoc
    New Member
    February 23, 2017

    yes fir IPSEC, but you will need to test and diagnostic phase1 & 2  issues.

     

     

    Terms & ConditionsAccessibility statement