Skip to main content
Yazeed-
Yazeed-
New Member
May 22, 2023
Question

IPv6 To IPv4 VIP

  • May 22, 2023
  • 1 reply
  • 5460 views

Hi

i have fortigate firewall with the firmware 6.4.12 installed and i want to create firewall policy that has IPv6 external IP and mapped to IPv4 IP. i created the VIP in nat64 but when i try to apply it on the IPv6 policy the VIP is not showing.

1 reply

akristof
Staff
akristof
Staff
May 22, 2023

Hi,

You need to select NAT64 and then you should be able to select VIP as destination.

Yazeed-
Yazeed-Author
New Member
May 22, 2023

i tried that but still i cant publish the service as IPv6  

akristof
Staff
akristof
Staff
May 22, 2023

Hi,

You are still not able to select VIP in firewall policy? If you are on 6.4, you need to enable under feature visibility IPv6 and Nat46/Nat64 options. Then create NAT64 VIP and then use this VIP in IPv4 policy.

Terms & ConditionsAccessibility statement