Skip to main content
mumbles202
New Member
July 22, 2015
Question

IPsec VPN to Sonicwall w/ Dynamic IP

  • July 22, 2015
  • 1 reply
  • 6952 views

Is it possible to setup a site to site (lan to lan) tunnel between a Fortinet 100A and a remote Sonicwall (this side will have a private dhcp address as it will sit behind another firewall).  I was planning on setting it up using firewall identifiers on both sides if possible.  I know the Sonicwall supports it and I believe the Fortinet will as well based on what i have read so far.  Just want to confirm before I proceed in ordering the Sonicwall.

    1 reply

    anil_nayak_FTNT
    Staff
    Staff
    July 23, 2015

    Hello,

     

    As the Sonicwall ipsec g/w is Private dynamic IP, on FGT you can configure the VPN as Type:Dial-up. Please find the link below for configuration assistance 

    http://video.fortinet.com/video/102/site-to-site-ipsec-vpn-behind-firewall-nat-device

    http://kb.fortinet.com/kb/viewContent.do?externalId=11657

     

    Regards

    Anil