ipsec vpn connected but cannot ping remote site

my local ip is 192.168.2.33.

i setup IPSec VPN in office's Fortinet Wifi 60E.

i use FortiClient VPN connect office site and it works and gets ip 192.168.0.10.

but i cannot ping any office computer.

please advise to help.

thanks,

Joe

New Member

Did you set up the needed rules to allow traffic go throw?

jlongAuthor

New Member

i set the policy as below:

Incoming Interface: FortiClient

Outgoing Interface: lan

Source: FortiClient

Destination: all

Service: ALL

NAT enabled

IP Pool Configuration: Use Outgoing Interface Address

New Member

You need to disable nat and create also a reverse rule. From lan to forticlient....

Sign up