ipsec tunnel up but no return traffic from palo alto firewall
Hello Expert,
I was able to successfully create an IPsec tunnel between Palo alto and my FortiGate.
I am seeing ping and http traffic success leaving my FortiGate but the return traffic is being deny
below is details of a deny packet
General
Absolute Date/Time | 2022-11-03 16:00:53 |
Last Access Time | 16:00:53 |
Duration | 0 |
Session ID | 47,180 |
VDOM | root |
NAT Translation | noop |
Source
Source | 192.168.150.204 |
Source Country/Region | Reserved |
Source Interface | BOG_Lan (internal1) |
Destination
Destination | 192.168.142.201 |
Destination Country/Region | Reserved |
Application Control
Application Name | icmp/0/0 |
Category | unscanned |
Protocol | 1 |
Service | icmp/0/0 |
Data
Received Bytes | 0 B |
Received Packets | 0 |
Sent Bytes | 0 B |
Sent Packets | 0 |
Action
Action | accept |
Security Action | |
Policy ID | Implicit Deny |
Policy Type | Firewall |
Security
Level | notice |
Cellular
Service | icmp/0/0 |
Other
Log event original timestamp | 1667505653641792800 |
Timezone | -0400 |
Log ID | 0000000013 |
Type | traffic |
Sub Type | forward |
Identifier | 21 |
Source Interface Role | lan |
Destination Interface Role | undefined |
I humbly request some assistance to vet the deny message and provide some guidance.
Regards