Skip to main content
David_P28
David_P28
New Member
October 23, 2020
Question

Internet access on VPN SSL with tunnel mode

  • October 23, 2020
  • 1 reply
  • 5120 views

Hi,

I am using SSL VPN connection with split tunneling desactivated. I also use a WAN LLB interface.

My pb is that i can access to the local network, but i cannot access to Internet. So, i need to create an firewull rule with ssl.root in incomming interface and my WAN LLB link in outgoing interface. But in the outgoing interface list, i cannot see my LLB link ? 

Can you please help me to understant why ?

Thank you.

David.

    1 reply

    boneyard
    boneyard
    Valued Contributor
    October 24, 2020

    WAN LLB isn't a term anymore in newer FortiOS versions, which one are you using?

     

    it is is a newer 5.6+ you are probably looking for the sdwan interface.

     

    if not then adding a screenshot might help us understand and point out what you want.

    David_P28
    David_P28Author
    New Member
    October 26, 2020

    Thank you for your reply,

    i know that LLB is not used anymore and was replaced by SDWan. And my problem is not with that feature (who works well). I just wanted to know why i cannot select WAN interface in my policy (ssl.root to WAN) to allow internet access from SSL connections to the office internet access.

    Do you have an idea ?

    (the firmware migration is planned)

    boneyard
    boneyard
    Valued Contributor
    October 26, 2020

    my idea is that because WAN is a part of the LLB / SD-WAN interface, making it impossible to select part of that interface.

     

    a screenshot of your available interfaces would help a lot with pointing it out.

    Terms & ConditionsAccessibility statement