Internal DNS over IPSEC

I have a FortiGate 60D v6.0.0 build 0076 (GA)

interface v31 192.168.31.1/24

I have DNS configured 

config system dns-server
    edit "v31"
    next
    edit "OSPF"
    next
    edit "ssl.root"
    next
end

(These are all set to recursive not sure why it doesn't show up in the config)

config system dns-database

    edit "Townhouse"

        set domain "th.harr.io"

        set source-ip 192.168.31.1

        config dns-entry

            edit 1

                set hostname "CLP-325W"

                set ip 192.168.31.49

            next

            ....

        end

        set primary-name "fw.th.harr.io"

        set contact "REMOVED"

    next

    edit "haven2.local"

        set domain "haven2.local"

        set authoritative disable

        set forwarder "192.168.1.1" 

        set source-ip 192.168.31.1

    next

end

It works from the v31 interface, the ospf interface and the ssl interface. However, I have an IPSEC tunnel (In policy Mode) that I can not get the remote side to be able to use the dns server. The policy is wide open

config firewall policy

    edit 8

        set name "IPSEC to H2"

        set uuid c5b4e622-67a8-51e8-f7ef-f1a2eec092f6

        set srcintf "v31"

        set dstintf "wan1"

        set srcaddr "all"

        set dstaddr "192.168.0.0 [DMZ_H2]" "192.168.1.0 [INTERNAL_H2]"

        set action ipsec

        set schedule "always"

        set service "ALL"

        set logtraffic all

        set inbound enable

        set vpntunnel "h2"

    next

end

Is there a way to allow the remote side (192.168.0.0/24 and 192.168.1.0/24) to be able to access the fortigate dns server on 192.168.31.1? The remote side is set to forward however, even a simple nslookup fw.th.harr.io 192.168.31.1 on the remote side fails. I also can not use IPSEC in interface mode as the remote side does not support it.