Interface is not able to delete.!

Forum|Forum|11 years ago
August 11, 2014
14 replies
53332 views

Hello, Recently I have upgraded 200D box from 5.0.7 to 5.2. I was using Two SSID' s . Users with bridged and Company_Guest with Tunnel for guest . But after upgrade I am not able to use the SSID and not even allowing me to delete the interface. How do I delete the interface?

Yw68593.jpg

Show previous replies

ede_pfau

SuperUser

I meant the current config. If you are running 5.2 at the moment then get the backup file (unencrypted!) and " exec factoryreset" , then restore the config file. Of course, you can scan through the config file to see if you can find any remaining parts which do not belong there.

NihasAuthor

New Member

Thanks Ede! I will try this on next maintenance window and will update.

Dave_Hall

New Member

Personally, I would have just loaded an unencrypted backup config into a text editor and perform a string search for " guest" references -- then edit or remove accordingly. For what' s it' s worth, when upgrading between major releases, I usually stick before and after configs into WinMerge just to see what changes were made to the config after the firmware upgrade.

NihasAuthor

New Member

Hi Dave, Thanks This sound' s good. So from config file I will remove the whole below entries and will do a restore. edit " Company_Guest" set vdom " root" set ip 10.128.14.2 255.255.255.0 set status down set type vap-switch set device-identification enable set snmp-index 17 next Will let you guys know the status. Thanks a lot for the help.

fordrewls

New Member

I found that mine was attached to Quarantine VLAN. Once I toggled the Quarantine Host option, was able to delete SSID.

Sign up

Login with SSO

Login to the community

Login with SSO