Skip to main content
MarcelV
MarcelV
New Member
June 21, 2019
Question

Importing existing (manually setup) IPSec VPN topology into new VPN Community

  • June 21, 2019
  • 1 reply
  • 2410 views

Hi,

 

We have built a IPsec VPN network throughout Europe using Fortigates. It seems interesting to have that imported in a new VPN Community on our FortiManager under VPN Manager. But it looks like the wizard will only allow you to create a new community from scratch. Also, the options offered (Full Meshed, Star or Dial up) do not fit our setup. Does anyone know if we can simply import our current setup as is into a community so we can monitor it more (especially with the Map View which only seems to be working when using a community)?

 

Kind regards,

Marcel

1 reply

chall_FTNT
Staff
chall_FTNT
Staff
June 21, 2019

> But it looks like the wizard will only allow you to create a new community from scratch.

Correct.  But you can manage existing VPNs from Device Manager & add new VPNs via VPN Manager (FMG 6.0 & later).

 

> Also, the options offered (Full Meshed, Star or Dial up) do not fit our setup.

Although it sounds like you are unlikely to use VPN Manager in this case if you cannot import, is there any reason you cannot piece together the desired topology using a combination of these communities?

> Does anyone know if we can simply import our current setup

No.  Not into VPN Manager.

 

 

Terms & ConditionsAccessibility statement