How to set policy routing on Fortigate 60D

1 reply
11800 views

Hi all,

I have 2 ISP WAN links - WAN1 and WAN2. My intention is to let users on subnet A route via WAN2 and all other users via WAN1. According to the FortiOS Handbook and other info i find online, I should be able to configure policy routing (based on source IP subnet), but no matter whether through GUI or CLI, i cannot find this option on my Fortigate 60D. My Fortigate is currently on v5.4.3 build 1111.

I go to Network --> Routing and all i can create are static routes based on destination IP. Can someone guide me on what do i need to enable to allow me to do policy based routing? Thanks!

Sudarsan_Babu

New Member

Hello Frogmist ,

For PBR we need to do first setup WAN1 & WAN2 distance and priority are same.

To enable this feature go to System -> Feature Select -> select Advanced Routing (under the Basic Feature)& apply the settings.

In cli

config router policy edit 1 set input-device "internal" set src "x.x.x.x " -------------> Internal Subnet set dst "0.0.0.0/0.0.0.0" set gateway Y.Y.Y.Y -------------> WAN set output-device "wan2"

end

Regards,

Sudarsan Babu P

PBR.JPG

Sign up

Login with SSO

Login to the community

Login with SSO