Skip to main content
Linkem
Linkem
New Member
May 10, 2017
Question

How to connect SSLVPN to S2S VPN

  • May 10, 2017
  • 1 reply
  • 3643 views

Hello,

      I'm a newbie,and I need assistance to connect an user with a SSLVPN to both sides of a S2S VPN.

So far I configured the S2S VPN, and it's working fine, I've configured the SSLVPN and I'm able to connect to the servers on the LAN side of the Main site, but I cannot reach anything on the Remote Site.

 

Main Site:

FG100D, Firmware v5.4.4,build1117

LAN: 192.168.51.1/24

File server: 192.168.51.10

SSLVPN Tunnel mode, no split tunnel

Policy to accesso LAN

 

Remote Site:

FG100D, Firmware v5.4.4,build1117

LAN: 192.168.15.1/24

Terminal Server: 192.168.15.60

 

What should I do to allow the SSLVPN user connected to the Main site to reach and use the Terminal server?

 

Thank you.

 

 

 

 

    1 reply

    Toshi_Esumi
    SuperUser
    Toshi_Esumi
    SuperUser
    May 10, 2017

    If no split tunnel, the issue is likely the remote site doesn't know how to get back to the SSL VPN client user. You need to have a route, policy, and a phase2 network (if not 0/0<-0/0) at proper places.

    Terms & ConditionsAccessibility statement