How to connect FORTIGATE 100C (DC1) and FORTIGATE 60B(DC2) Domain Controller

Forum|Forum|9 years ago
February 27, 2017
5 replies
5843 views

Hi Guys,

I have issue here I have DC(Domain Controller) in MAIN BRANCH and I want to connect to ANOTHER BRANCH DC(Domain Controller Connectged to MAIN Branch).

support12

New Member

Please explain..

rm_beginnerAuthor

New Member

I have 2 Windows Server one in Main and One in Branch the Main is connected to FTG100C and the branch connected to FTG60B. How configure these two server to connect to each other and the Branch Server DC is connected to Main Server DC

Thank you.

support12

New Member

A lot of info is missing so choose one scenario.

please show the ip of dc main and its gateway and do the same on branch.

And you are not telling the issue yet

You need read fisrt because what you try to do es basic configuration that are available thru knowledge base

When you say connect you mean one dc can ping the other dc... This is call reachable.

1- your main fortigate is located in a different location than branch and main is connected to the internet using a public ip different from branch..

You need to configure a ipsec vpn between both firewalls and the private ip on domain controller main is in different subnet than branch ip. Example of different ip subnet is dc main is 192.168.10.20 255.255.255.0 and dc branch is 10.20.10.5 255.255.255.0

Sign up

Login with SSO

Login to the community

Login with SSO