How to configure HA Reserved Management Interface on MGMT2 3000D

Forum|Forum|8 years ago
August 24, 2018
5 replies
10403 views

Hi Guys,

I am running a 3000D Cluster, and i want to user MGMT2 as my reserved management interface to manage the two devices separately but i am not winning, can someone please shed some light for me....when should one or how should one use the MGMT2 interface?

i have done VDOM Partitioning on the Cluster, so there is one VDOM running primarily on the Secondary Device, for me to do changes on that secondary device i need to access it separately.

Alexis_G

New Member

you do not have management on VDOM you have management on the box

to manage secondary FGT from cli , you execute from primary :

execute ha manage

// press enter to see thw available members then issue the command again with the numeric of the FGT you wish to manage.

Anyway management interfaces are dedicated for this use

Althouht you can try to configure management:

//on MGMT2

config system interface

edit mgmt2

set management-ip <ip subnet>

end

ujnetsecAuthor

New Member

I know i have management to the box, i can access the secondary box via CLI, but i want to access it via GUI using the MGMT2 as my "ha reserved management interface", i have done the config "//on MGMT2 config system interface edit mgmt2 set management-ip <ip subnet> end"

the IP i am using on the MGMT2 Interface is in the same subnet as MGMT1 but for some reason i cannot access the second device via GUI, i need GUI access so that i can make changes on the VDOM that is primary to the second device.

Alexis_G

New Member

Routing is ok ?

check this:

http://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-high-availability-52/virtual_clusteringExample.htm

Sign up

Login with SSO

Login to the community

Login with SSO