Skip to main content
rm_beginner
rm_beginner
New Member
May 3, 2017
Question

How to assign differrent network range in FTG 100C port #.

  • May 3, 2017
  • 1 reply
  • 3261 views

Dear All, i have only 1 network range 192.168.100.xxx (class c) i have IP cameras and it was joined to our network 192.168.100.xxx (class c) I want to segregate the cameras to our network. What I am going to do in FTG 100C? I want the cameras separate to 192.168.101.xxx(class c) But the 192.168.100.xxx local pc can access the 192.168.101.xxx IP CAMERAS.

Thank you.

    1 reply

    EMES
    EMES
    New Member
    May 3, 2017

    Very High Level you would need to create a new VLAN for the cameras on your switches, then create a new interface on the Fortigate to make the Fortigate the gateway for the cameras. The last thing you would need is security policy, in example. allow traffic from port1 to port2 and port2 to port1. Since you are seperating the networks then Im sure the policies will be more locked down.

    EMES
    EMES
    New Member
    May 3, 2017

    Too be clear you can add another subnet and gateway using secondary IP configuration on one interface but it will not be segregated.

     

    Terms & ConditionsAccessibility statement