Skip to main content
lletourn
lletourn
New Member
June 27, 2017
Solved

How can I setup LACP on Managed Fortiswitch

  • June 27, 2017
  • 1 reply
  • 12147 views

I have a FS-248D managed by a Fortigate 60E.

 

I have found many MANY examples on how to aggregate Fortilink interfaces, but I can't find a single example on how to aggregate ports on the fortiswitch.

Neither from GUI or CLI.

Actually I found some examples given when running the Fortiswitch in standalone, not managed.

 

The reason I want to do this is to support LACP (2 ports) from my linus NAS.

I had this setup on a DGS-1210-52 (might I add, the 248D is quite the upgrade!) which worked perfectly well.

 

Can someone help me?

 

Side question, does anyone see an issue trying to reuse one of the old DGS-1210 by aggregating it(using 4 ports) on the fortiswitch as well?

 

Thanks

Louis

    Best answer by brycemd

    Sorry, I am on 5.6 on my 60E. I haven't done any switch config on 5.4, maybe it is CLI only for 5.4 which offhand I do not know.

    1 reply

    brycemd
    brycemd
    New Member
    June 27, 2017

    Go to 'FortiSwitch Ports' section on your FortiGate and click 'Create New' and then 'Trunk'

    lletourn
    lletournAuthor
    New Member
    June 27, 2017

     There's no "Create New" on that page.

    The top is a search bar, then the switch is listed with all it's ports.

     

    I see that the used ports are green. All are assigned to a Native VLAN.

     

    FYI: FortiOS: v5.4.1,build5577

    FortiSwitch: v3.4-build192

     

    Thanks

    Terms & ConditionsAccessibility statement