Skip to main content
yaronbeny7
yaronbeny7
New Member
July 17, 2016
Question

How Can i block Internal 4 (my wifi) to internal2 (my lan)

  • July 17, 2016
  • 1 reply
  • 5024 views

hello,

i want to block traffic between internal 4 and 2.

so created a rule incoming interface> internal 4

source address:all

outgoing interface:internal2 (my lan)

destination address:all

service:all

action:block

and its not working, i try ping and access to my shared on lan.

 

    1 reply

    rwpatterson
    rwpatterson
    New Member
    July 17, 2016

    By default if you do not create any policies, there will be no traffic. If you do have other policies, they may be permitting the traffic you do not want. In each source=>destination pair, policies are executed in a top to bottom fashion, so make sure if you do have other policies from internal4 to internal2, they are in the right order to permit/deny the traffic you want.

    yaronbeny7
    yaronbeny7Author
    New Member
    July 21, 2016

    Please See My Rules On attached file.

     

    rwpatterson
    rwpatterson
    New Member
    July 21, 2016

    The very first rule in the list list is allowing all services from any interface to any interface. This is going to let everything go everywhere. The other rules don't matter at this point.

     

    Edit the column headers and add the "count" column. You will see that all the traffic is passing through the very first policy.

    Terms & ConditionsAccessibility statement