Skip to main content
arighttouch
New Member
November 22, 2018
Question

HA MGMT different DC's

  • November 22, 2018
  • 2 replies
  • 3414 views

Hi, im trying to setup a HA cluster between 2 1000D's running 5.6.5.

 

each FW is in a seperate data centre and has a dedicated heartbeat connection - and that bit works fine, what im struglling with is the MGMT interfaces when i join up the cluster.

 

data center 1 has a management network of 172.1.1.0 /24 and data center 2 uses 172.1.2.0/24

 

i have tried using MGMT1 in site 1 and MGMT2 in site 2 but that doesnt work.

 

how do i get HA setup but have MGMT access to both devices on their respective MGMT IP's?

 

thanks in advance.

    2 replies

    neonbit
    New Member
    November 22, 2018

    When you configure HA you can dedicate an interface as a management interface (in the HA settings page). Enabling this will ensure that interface IP address does not get sync'd between devices. So you could enable MGT1 as a management interface for both devices then configure each one's IP address individually.

     

    arighttouch
    New Member
    November 22, 2018

    neonbit wrote:

    When you configure HA you can dedicate an interface as a management interface (in the HA settings page). Enabling this will ensure that interface IP address does not get sync'd between devices. So you could enable MGT1 as a management interface for both devices then configure each one's IP address individually.

     

    as in the "management interface reservation" ? i dont see the mgmt interfaces listed in there :(

    Thought Leadership Security Summit. Outpace New Threats with AI - enhanced defense. Tuesday, Septmeber 15, 8:30 AM - 2:30 PM PT. The Golf Club at Newcastle, WA.
    Fortinet Flag the Hack. Wednesday, August 26, 9:00 AM - 5:00 PM ET, COSM, Atlanta, GA.