Skip to main content
A
Anonymous_User
Contributor III
April 30, 2008
Question

HA Master and Slave - election process?

  • April 30, 2008
  • 5 replies
  • 6158 views
Within an HA cluster (2 x FortiGates) with the priority set to 250 on the master and 128 (default) on the slave. When the Master fails the failover process takes places and the Slave then becomes the new Master. However when the Master recovers and becomes active again should it then take back the active role of being Master or does it just become a slave within the cluster?

    5 replies

    player
    player
    New Member
    May 1, 2008
    you can configure this option with the " session-pickup" option
    A
    Anonymous_UserAuthor
    Contributor III
    May 1, 2008
    hi player - just to confirm, with ' session pickup' enabled a failed master being the FG with the highest priority should resume the role of master once it recovers?
    fortikid
    fortikid
    New Member
    May 7, 2008
    Dear Bros! I have cool case related to HA on FG-1000A-FA2 as below: After HA config done, when i connect cable from same ports on every member of clusters, the traffic become very slow. Even, when i disconnect all cables on slave unit, while keep HA link between fiber ports of 2 FG, the status doesnt be improved. More details: 1. HA will be made in A-P mode 2. Master will use: Port 1,2,3(VLAN 1,2,3) to connect to internal LAN. Port 7,8 connect to 2 ADSL lines, and port 10 connect to fiber link. HA port is second fiber port on chassis. 3. Session pick-up is enabled. 4. Port monitoring include: Port 1,2,3, 7,8,10... Would you pls spend time in my case, bros..I really need your help now... Big tks to your supports. Brgds
    red_adair
    red_adair
    New Member
    May 10, 2008
    the role of a new joining (or re joining) Device depends of how the CLI-Option under #config sys ha set override ena || dis is configured. In case override is enabled the Device with the higher prio will come back as master (if other conditions like monitored interfaces are met of course). Please check the " HA Guide" on docs.forticare.com. It explaines how the election process will work. -R.
    osDxi
    osDxi
    New Member
    May 10, 2008
    Also, see below for corrected definition regarding HA age. http://kc.forticare.com/default.asp?id=3137
    Terms & ConditionsAccessibility statement