Skip to main content
AlPe
AlPe
New Member
October 22, 2015
Question

HA Active-Standby and teaming connections

  • October 22, 2015
  • 1 reply
  • 3859 views

Hi all,

 I have a question in regards of the HA (Active Standby) and teaming connection on SWITCH PORTs.

Both fortinet (200D) monitor the green ports (the upper switch connections) and if a failure occur the STANDBY became MASTER (and vice versa) but the connection on the servers remains unreachable probably because the teaming do not recognize the firewall's role switch.

Server's ports connected to the firewalls are "set type hard-switch".

 

How can I manage this scenario? or any suggestions?

 

Thanks in advance.

Alpe

1 reply

AlPe
AlPeAuthor
New Member
October 29, 2015

Hello,

 Someone can help me? please.

Let me know if there are some missing point on my description.

 

Best Regards

AlPe

gschmitt
gschmitt
New Member
October 30, 2015

Could you try something for me?

Try connecting the FortiGate interfaces for one server to a small switch (or a vlan) and connect that to your server NICs and try disabling one FortiGate

 

Also check your arp -a record while the slave is active

Terms & ConditionsAccessibility statement