Skip to main content
rowo
rowo
New Member
January 26, 2018
Solved

GUI DHCP Option not shown

  • January 26, 2018
  • 1 reply
  • 27789 views

Hi together,

after updating my 60E FortiOS to 5.6.3 no DHCP Server under Network / Edit Interface is shown.

At "internal" Network it is shown - but not at additonal Network "dmz".

Configuring whithin CLI is working w/o any problem - but it is not shown in GUI.

 

Thanks

Greets

Robert

Best answer by neonbit

When configuring the interface in the GUI there's an option to select it's role (LAN/WAN/DMZ/Undefined).

 

If you select WAN or DMZ then it won't let you configure the DHCP via the GUI. Change the DMZ interface's role to LAN and you should see the DHCP option available.

1 reply

rwpatterson
rwpatterson
New Member
January 26, 2018

Welcome to the forums.

 

2 questions:

1) What did you upgrade from & did you follow the upgrade path? (see http://cookbook.fortinet.com/sysadmins-notebook/supported-upgrade-paths-fortios/)

2) Did you test multiple browsers and/or clear the cache?

rowo
rowoAuthor
New Member
January 26, 2018

Hi Bob,

thanks for your answer - yes I followed the cookbook - the prev Version was the 5.4 and btw. the IPsec VPN was not imported as mentioned in the upgrade-path. All other funtions are working properly.

I tested two exporers (firefox / ie) both almost the current version.

 

Robert

neonbit
neonbitAnswer
New Member
January 28, 2018

When configuring the interface in the GUI there's an option to select it's role (LAN/WAN/DMZ/Undefined).

 

If you select WAN or DMZ then it won't let you configure the DHCP via the GUI. Change the DMZ interface's role to LAN and you should see the DHCP option available.

Terms & ConditionsAccessibility statement