Fully redundancy multi IPSEC tunnels

I would ask you for a hint in reference to the scheme that I send below.

Is it possible to achieve the full redundancy of IPSec tunnels, not only between the classic site to site between Wan 1 Site A  to Wan1 Site B and Wan2 Site A and to Wan2 Site B but also in the variant of the cross link connection if the failures have been connected at the same time alternating at the same time For example, with WAN 1 Site A to WAN 2 Site B and vice versa? From my opinion, the scheme shows that 8 IPSec site tunnels are needed, but how to set it so that regardless of the WAN connection failure there was always traffic between site a and site b, whether it goes use maybe with routing on OSPF, or SD WAN or Link monitor?

Best regards,