Skip to main content
Geom
Geom
New Member
November 12, 2009
Question

FTP Directory listing issue

  • November 12, 2009
  • 4 replies
  • 3801 views
We recently implemented a 3016B (running latest 4.1 firmware) in place of a really old Pix525. So far so good, except one odd issue. I have seen reports from users saying they sometimes can not list specific directories via FTP after they login. Now I know what you are thinking.. the data connection is getting blocked. However other clients including myself can connect with both Active and Passive mode FTP and read the same directories. We have confirmed that it is not a permissions issue and this just cropped up when we cut over from the Pix. Any ideas? Thanks, Geoff

    4 replies

    Anonymous3
    Anonymous3
    New Member
    November 13, 2009
    I have the same issue....
    Robert_Cerny
    Robert_Cerny
    New Member
    November 16, 2009
    Hello, it' s still blocking issue IMHO. Set FTP passive range of the FTP server to some interval and open the same interval on the FG unit. To test that it' s blocking issue simple open all to all and call your customer to test it.
    Geom
    GeomAuthor
    New Member
    November 16, 2009
    The ftp session helper/ protocol recognition should be handling the data channel for passive or active mode connections and there should be no reason to open more ports. Also, I have to allow both Passive and Active connections and can not limit to only Passive, so your solution (even if it worked) won' t resolve the problem.
    Geom
    GeomAuthor
    New Member
    November 16, 2009
    @Robert Cerny - Another point is that I would see the blocked connections you refer to in the traffic log, and so far there is no evidence of that.
    Terms & ConditionsAccessibility statement