Skip to main content
minidan
minidan
New Member
September 7, 2018
Question

FSSO not working - odd icon

  • September 7, 2018
  • 1 reply
  • 3623 views

For background, I am trying to fix a problem where Web Filtering is not working.

Method being used is FSSO and Explicit Proxy, with a custom web filter applied to certain AD groups. Works fine on another site. Also the FSSO Agent and DC Agents installed on my local DC's report no issue connecting to the Firewall.

 

See attached screenshot, I am baffled....

 

    1 reply

    Megatron
    Megatron
    New Member
    September 7, 2018

    What version of firmware are you on. If not at least 5.4.9 or 5.6.5 I'd suggest upgrading. From little I can see on the picture it looks one of the old versions like 5.2 or below.

     

    Also from work I've done, put AD agent on all AD servers in advance mode, use the collector, then ensure you're not using polling mode on the FW setup.

     

    Also sometimes the FSSO local polling isn't deleted, make sure on the CLI this is removed. This reduces the amount of login and log off events we found

     

    config user fsso  edit "Local FSSO Agent"  set server "127.0.0.1"  set ldap-server "XXXXXXX"  next 

    minidan
    minidanAuthor
    New Member
    September 12, 2018

    Hi, it's around 5.2 pending an upgrade... I should mention this *was* working fine for months then just stopped.

     

    What is that icon supposed to be telling me?

     

    I'll check the suggestions above tomorrow, thank you.

    Terms & ConditionsAccessibility statement