Skip to main content
msalhi
msalhi
New Member
February 11, 2018
Question

FotriADC One Arm Mode-Server Gateway

  • February 11, 2018
  • 1 reply
  • 4642 views

Dear Expert,

 

I have Fortigate & FotriADC implementation,I have decided to used FortiADC in One Arm Mode.

FortiADC will distribute the packets to PRO servers,I am just wondering if make FortiGate as the Gateway for the servers, will FortiADC work normally and all of them are in different IP subnets ? so FortiADC will reach the real server by routing the packet through L3 switch.

I would really like to attached the design , but unfortunately Attaching photos feature is not working .

 

Pro Servers IP :1.1.1.2,3,4

GW 1.1.1.1

 

FortiGate Internal Interface for Servers 1.1.1.1/24

 

FortiADC VIP 192.168.1.1

FortiADC Internal Interface is 3.3.3.3

Gateway of FortiADC 3.3.3.1 and it is L3 switch

Thanks alot

 

    1 reply

    boneyard
    boneyard
    Valued Contributor
    May 19, 2018

    Yes, in principle the FortiADC will just send the traffic toward the real servers no matter where they are and if the default or specific route on the FortiADC can reach the real servers.

     

    BUT getting traffic back to the FortiADC can be in an issue in one-armed mode. so you need to use full NAT.

    Terms & ConditionsAccessibility statement