I would like to add my 2 FortiAP 221c's to the 10.6.10.0 network with IP's 10.6.10.4 and 10.6.10.5 but still carry the wireless subnets of 10.6.30.0 and 10.6.40.0. Does anyone know how I can accomplish this?
I think you already figured out how to set up tunnel mode SSIDs with separate subnets based on the interface screen you attached. They're just interfaces so that you can build policy sets to wherever you want to connect them to.
But I want the actual AP's themselves to have the 10.6.10.4 and 10.6.10.5 IP addresses. Currently I have one set as static with the 10.6.10.4 and it doesn't work. The other one I plugged it in with no configuration and it works but its on a 169.254.1.0 network.
Here is a screenshot of the settings in the AP I gave the Static IP to. It auto generated the 169.254.2.1 IP and won't let me change it to 10.6.10.1...
