FortiWifi 40C sending traffic WAN1 instead of VPN site-to-site

Hi,

I have setup a VPN site to site with a fortigate 40F and a fortiwifi 40C (FortiOS 5.2). The main problem is I have 2 laptops.

The first one all the traffic is going to the tunnel but the second one, the traffic is sent to WAN1.

The 2 laptops are in the same segment (192.168.11.20x)

I don't understand what is happening. The policy is correct from Wifi to tunel (Source: All Destination: All)

I have created the static route 0.0.0.0/0 to the tunnel.

I have remarked also I have to set the priority tunnel with the same number as the WAN1 interface. If not the VPN is not going up.

Staff & Editor

Hi Hakim,

I am assuming you are trying to reach the same destination on both laptop during the test, right?

Are you able to run the 'diag debug flow' command for us?

Sign up