Fortivoice 500f and Cisco SPA504G - busy tone followed by Decline, no incoming(local xtns)
Hi,
I just installed a brand new Fortivoice 500F and configured everything successfully, except that the local extensions are not accepting incoming calls. If I test dialing a cellphone or a phone in the office peer remotely they work fine, but phone to phone internally gets busy tone followed by Decline (example: From ext 104 to ext 101<<)
See log example below:
Log/voice:
"Reject INVITE message from: 'Angel' <sip:104@192.168.0.x> to: <sip:102@192.168.0.x>, Cause: Decline"
Call history:
2020-02-10 23:07:46 | 2020-02-10 23:07:59|00:00:12|No Answer|Incoming|Fusion|Voice*Phones: Cisco SPA 504G , using G711u... (extensions show registered properly on phone system).
Any assistance greatly appreciated.
Thanks!
