Skip to main content
kinmun
kinmun
New Member
May 21, 2015
Solved

FortiView only shows now

  • May 21, 2015
  • 4 replies
  • 40570 views

i noticed that my Fortiview only shows data for now.

there is no data in 5 mins, 1 hour and 24 hours.

what is the settings I need to configure ?

i have analyzer installed as well.

logs is configured to store & upload to analyzer daily at 23:59.

 

 

    Best answer by YtseJam

    I think you should stick with realtime settings then if you want to monitor your logs just go with your analyzer. Since you have FortiAnalyzer, let it manage the reports then for your fortigate box, let it do the firewalling. Just a suggestion. 

     

    Regards,

    Jam

    4 replies

    kinmun
    kinmunAuthor
    New Member
    May 25, 2015

    only the All Sessions in Fortiview have information to show.

    the rest like Applications only have now logs to show.

    is this normal ?

     

    YtseJam
    YtseJam
    New Member
    May 25, 2015

    Hi,

     

    Kindly check your log settings, I think your settings was in "realtime" that's why it shows only "now". Or change your "Display logs from" to FortiAnalyzer under Log & Report>Log Config>Log Settings. 

     

     

    markwen
    markwen
    New Member
    May 25, 2015

    Correct me if I'm wrong, but doesn't "Enable local reports" need to be enabled to view this kind of info from the FortiGate dashboard? Otherwise it won't store historical data in it's local db.

    Irfan_Pathan
    Irfan_Pathan
    New Member
    May 27, 2015

    Hi, Upgrade your firmware to v5.2.3 See attached screenshot.

     

    -Irfan Pathan

     

    gustav_koekemoer
    gustav_koekemoer
    New Member
    April 6, 2018

    Hi All

     

    I believe I have just fixed this issue. 

     

    If you setup your Analyzer under "config log fortianalyzer setting" it seems to always take preference in Fortiview 5min,1H and 24H even if you select "disk" as the GIU view.

     

    I moved my config to "config log fortianalyzer3 setting" and I can now view historical disk logs via Fortiview and the Analyzer is working fine.

     

    Regards

    Gus

     

     

    sagipael
    sagipael
    New Member
    May 27, 2020

    Thanks! that works!

     

     Ver 5.6.12

     

    gustav.koekemoer@voxtelecom.co.za wrote:

    Hi All

     

    I believe I have just fixed this issue. 

     

    If you setup your Analyzer under "config log fortianalyzer setting" it seems to always take preference in Fortiview 5min,1H and 24H even if you select "disk" as the GIU view.

     

    I moved my config to "config log fortianalyzer3 setting" and I can now view historical disk logs via Fortiview and the Analyzer is working fine.

     

    Regards

    Gus

     

     

    VictorP1
    VictorP1
    New Member
    August 11, 2022
    Hello, I have read and tried some of the solutions that you have mentioned but I have the problem in a Forti 100F, it still does not show me results in Fortiview web sites. Do I necessarily need to connect a Fortianalyzer to achieve this?Captura.PNG
    Terms & ConditionsAccessibility statement