Skip to main content
DsB
DsB
New Member
April 20, 2021
Question

FortiSwitch 1024D Transceiver issue.

  • April 20, 2021
  • 1 reply
  • 6238 views

Hi i am new to this, i have a FortiSwitch 1024D that can only indentify the transceiver on any given port after a reboot.

 

Is there a command that can refresh or reset a transceiver on a port?

 

Regards.

    1 reply

    rgracioli_FTNT
    Staff
    rgracioli_FTNT
    Staff
    April 21, 2021

    Hi,

     

    It's not necessary to reboot FortiSwitch for a transceiver to be recognised. Make sure you're using a compatible transceiver (https://docs.fortinet.com/document/fortiswitch/6.4.4/fortiswitch-compatible-transceivers). 

    DsB
    DsBAuthor
    New Member
    April 21, 2021

    Hi, the transceiver is SFP1G-LX-31 1000Base SFP 1310nm 10KM, is this compatible with this unit?

    Regards.

    rgracioli_FTNT
    Staff
    rgracioli_FTNT
    Staff
    April 22, 2021

    Hi, the type mentioned is supported, but you may be using a transceiver model that is not MSA compliant. I suggest that you open a case with support to have it checked. 

    Terms & ConditionsAccessibility statement