FortiOS v5.6.1 is released...!!

Loaded on my personal 61E. So far so good. Fixes a lot of bugs but does still maintain some of the annoying ones I REALLY wish would go away.

Another issue - cannot sync HA cluster in active-passive mode. Slave device always show out of sync.

This is is just too much for me. I've downgraded to 5.6.0, as this one has bugs that I can live with...

@Andy Bailey @SMabile @brycemd @bommi Send "Suspicious Files Only" option is always available in CLI. It is not available on GUI when create a new AV profile since 5.4.1. However, if you turn it on from CLI, GUI will still display it.

BTW, the GUI behavior, an option is shown on GUI only after it is configured from CLI, is adopted in some FOS GUI pages. For example, in proxy mode vdom, when a new AV profile is created on GUI, you WONT be able to see Inspection Mode option and Scan Mode option. Inspection Mode option and Scan Mode option starts to be shown on GUI once inspection-mode is explicitly set to flow from CLI.

I upgraded 60D to 5.6.1. But the result is not good

The CPU usage rate has always reached 100%.

The usage rate of miglogd is abnormal. I turned off all logging functions, but it did not improve. This problem does not occur in 5.6.0. It seems to be a bug.

Run Time: 0 days, 2 hours and 14 minutes 97U, 0N, 2S, 1I; 1839T, 1493F miglogd 56 R 99.0 0.6 newcli 868 R 0.9 0.9 pyfcgid 833 S 0.0 1.5 pyfcgid 834 S 0.0 1.5 httpsd 105 S 0.0 1.5 cmdbsvr 38 S 0.0 1.5 httpsd 106 S 0.0 1.5 pyfcgid 831 S 0.0 1.5 pyfcgid 832 S 0.0 1.4 cw_acd 94 S 0.0 1.2 httpsd 58 S 0.0 1.2 httpsd 104 S 0.0 1.1 forticron 67 S 0.0 1.0 newcli 867 S 0.0 0.9 fgfmd 93 S 0.0 0.9 ipshelper 82 S < 0.0 0.8 updated 76 S 0.0 0.7 forticldd 68 S 0.0 0.7 dnsproxy 91 S 0.0 0.7 authd 69 S 0.0 0.7