Skip to main content
Best answer by wcbenyip

I just upgraded our box (200D, 100D, 80CM..) with the latest v5.6.0, and also upgraded the FA with the latest v5.4.2 (it needs to rebuild the DB for 2 days..) Everything seems good and the IPSec VPN, SSLVPN without any dropping after the upgrading.

 

I noticed that the "Threat Map" in v5.4.4 is gone once upgraded to v5.6.0... even it's somehow a gimmick, but it's nice if can keep in v5.6~

 

The Physical / Logical Topology is nice but I found it recognized the host in the wrong side... like an internal host located at the side of WAN1... I am not sure but I set the role as LAN for internal ports and the DMZ...

 

For the CSF (Cooperative Security Fabric).. seems I have to enable the FortiTelementry on interfaces and must to use OSPF rather than static routing.... still not yet fully experience the benefit / beauty of Security Fabric....

1 reply

BWiebe
BWiebe
New Member
March 31, 2017

Gotta be a brave soul to have that on anything but a test box, for a few patch levels, anyways.

Alby23
Alby23Author
New Member
March 31, 2017

The FortiView functionality related to Physical and Logical Topology is awesome now.

AP and Switches seen as access devices and so on. Really good shot.

emnoc
emnoc
New Member
March 31, 2017

I would  try it but I see they silenltly drop the FWF60D model but the FGT60D is on the supported device list.

 

Ken

Terms & ConditionsAccessibility statement