Fortinac-F Vlan Switching

Forum|Forum|2 years ago
January 15, 2024
4 replies
3206 views

I'm using Fortinac-F ver 7.2.5.
SNMP
Ssh
Vlan
Although the configurations are correct and also the necessary rules are open, the switch cannot assign the user to the relevant vlan. It successfully assigns to the relevant vlan in the logs, but it does not change in the switch.

FortiNAC

rcpdkcAuthor

Explorer II

In addition, I use Huawei Switch.
My settings are as follows:
Port default vlan100( also this nac eth1 isolation vlan)
Port link-type access

ndumaj

Staff

Hello,

What is the Huawei SW OID?
Did you auto added the SW into the inventory, is the correct mib matched for the Huawei SW you are using?
Does the VLAN change works when you do set manual vlan on the port of teh sw from FNAC Inventory Device port?
Try resync interface on the Huawei SW device.
Does the L2 poll works?

BR

rcpdkcAuthor

Explorer II

I added the devices with discovery. Ssh and SNMP information is correct.

ndumaj

Staff

Hi,
Unfortunately there is no guide for Huawei SW integration but it is easy basically chek only this part:
https://docs.fortinet.com/document/fortinac-f/7.2.0/huawei-wireless-integration/386277/model-the-device#_Toc148108102
See if you can successfully validate the credentials

BR

rcpdkcAuthor

Explorer II

When I do L2 pooling, the current description does not come. I correct the description and then I do pooling but it does not come again.

ndumaj

Staff

Under the Network - Inventory - Device --> polling menu whn you heit L2 poll now does the Last attempted poll and Last successful poll time updates??

Please send us a screenshot

ndumaj

Staff

Additionally provide us the CLI output:
#exec enter-shell

# device -ip <IPaddress of Huawei SW>

# getmibfile -ip <IPaddress of Huawei SW>

BR

Sign up

Login with SSO

Login to the community

Login with SSO