Explorer

Solved

FortiManager Import Configuration Address Object interface binding contradiction

I have the same question as KB below

Is there any other solution in the new version?

Is it possible to make quick adjustments from FortiManager during import configuration to make it import properly?

Thanks.

Best answer by kyle-hsuan

Hi @Anthony_E

I had a problem about firewall address conflicts.

"firewall address",FAIL,"(name=10.0.0.0/8, oid=2271, reason=interface((firewall address:10.0.0.0/8) wan1<-any) binding fail)"

So I used version 7.4.2, it will auto map to dynamic type address object, that
Solved my problem.

Thanks.

Staff

Hello Kyle,

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

Thanks,

Best Regards

Staff

HEllo,

Here the answer form one of our expert:

"There is an interface mapping dialog where you can choose the actual mapping at the import time, this should avoid conflicts at the first place:

Best Regards

kyle-hsuanAuthorAnswer

Explorer

Hi @Anthony_E

I had a problem about firewall address conflicts.

"firewall address",FAIL,"(name=10.0.0.0/8, oid=2271, reason=interface((firewall address:10.0.0.0/8) wan1<-any) binding fail)"

So I used version 7.4.2, it will auto map to dynamic type address object, that
Solved my problem.

Thanks.

Staff

Hello Kyle,

Thanks a lot for sharing your solution!

Regards,

Best Regards

Sign up